Vectors are mathematical objects that carry two pieces of information simultaneously — magnitude and direction. Unlike scalars (which have only magnitude), vectors are essential for describing physical quantities such as displacement, velocity, force, and electric field. The algebra of vectors — addition, subtraction, scalar multiplication — forms a language that unifies geometry and physics. For JEE (Main & Advanced), vectors contribute 2–3 questions per paper, often combined with 3D geometry. This first topic covers the foundational concepts: types of vectors, vector operations, and the section formula in vector form.
1. Basic Concepts — Scalars and Vectors JEE Main & Advanced
A scalar is a quantity described by magnitude alone (e.g., mass, temperature, speed, time). A vector is a quantity described by both magnitude and direction (e.g., displacement, velocity, force, acceleration).
A vector has:
- Initial point (tail):
- Terminal point (head):
- Magnitude: — the length of the arrow
- Direction: from towards
Vectors are denoted by bold letters () or letters with arrows (). Magnitude: or simply .
Types of Vectors
| Type |
Definition |
Key Property |
| Zero vector |
Magnitude = 0; direction undefined |
; additive identity |
| Unit vector |
Magnitude = 1; |
Gives direction of ; |
| Equal vectors |
Same magnitude AND same direction |
Can be at different positions (free vectors) |
| Negative vector |
Same magnitude, opposite direction |
|
| Parallel (Collinear) vectors |
Parallel lines of action; same or opposite direction |
iff for some scalar |
| Coplanar vectors |
Lie in the same plane |
Any two vectors are always coplanar; three vectors may or may not be |
| Position vector |
Vector from origin to point : |
Uniquely identifies in the coordinate system |
| Coinitial vectors |
Same initial point |
— |
| Like/Unlike vectors |
Like: same direction; Unlike: opposite directions |
Both must be parallel |
2. Vector Addition JEE Main & Advanced
Triangle Law of Vector Addition
If and , then . The resultant is the vector from the tail of the first to the head of the second when placed head-to-tail.
Parallelogram Law of Vector Addition
If and are two sides of a parallelogram from the same vertex, the diagonal from that vertex represents .
Properties of Vector Addition
| Property |
Statement |
| Commutativity |
|
| Associativity |
|
| Additive identity |
|
| Additive inverse |
|
Magnitude of Sum — Key Results
For angle between and :
- Maximum when (same direction)
- Minimum when (opposite directions)
- If :
- Triangle inequality:
3. Scalar Multiplication JEE Main & Advanced
For a scalar and vector , is a vector with:
- Magnitude:
- Direction: same as if ; opposite if ; zero vector if
Properties of Scalar Multiplication
- (distributive over vector addition)
- (distributive over scalar addition)
- (associativity with scalars)
- ; ;
Unit Vector in the Direction of
The unit vectors along the coordinate axes are , , , with .
4. Components and Representation in 3D JEE Main & Advanced
Any vector in 3D space can be expressed in terms of the standard basis vectors , , :
where are the components (or coordinates) of along the -, -, -axes respectively.
Magnitude
Operations in Component Form
If and :
| Operation |
Result |
|
|
|
|
|
|
| iff |
, , (components equal) |
Direction Cosines and Direction Ratios
For vector making angles with -, -, -axes:
are the direction cosines. are the direction ratios.
Key identity:
The unit vector — direction cosines are simply the components of the unit vector.
5. Position Vectors and the Section Formula JEE Main & Advanced
The position vector of a point with respect to origin is .
Vector Joining Two Points
If has position vector and has position vector , then:
Section Formula in Vector Form
If divides in ratio :
- Internal division:
- External division:
- Midpoint ():
Centroid of a Triangle
If , , have position vectors , , , the centroid has position vector:
6. Linear Combination and Collinearity JEE Main & Advanced
Linear Combination
A vector is a linear combination of vectors and if for some scalars .
Linearly Independent and Dependent Vectors
- Vectors are linearly dependent if one can be expressed as a linear combination of the others.
- They are linearly independent if .
- Any two non-parallel vectors are linearly independent.
- Three coplanar vectors are always linearly dependent.
- are linearly independent — they form a basis for 3D space.
Collinearity of Three Points
Points , , with position vectors , , are collinear if and only if:
for some scalar
Equivalently: , i.e., satisfy .
Component test: , , are collinear iff the direction ratios of and are proportional.
Coplanarity of Four Points
Points are coplanar if , , are coplanar vectors, i.e., one can be expressed as a linear combination of the other two.
7. Important Results and Identities JEE Main & Advanced
Key Vector Identities
- — Parallelogram law
- — useful in dot product problems
- If and : vectors make equal angles of with each other
- If : (equal cross products)
Mid-Point Theorem in Vector Form
If and are midpoints of sides and of triangle , then . This follows directly from the midpoint formula.
Centroid Divides Median in 2:1
If is the midpoint of , then (centroid) divides in ratio from :
✓
Practice Questions (JEE Level)
Q1: If , the unit vector in the direction of is:
A)
B)
C)
D)
Answer: A) .
Explanation:
First, find the magnitude of the vector :
To find the unit vector , divide the original vector by its magnitude:
.
Q2: The position vectors of and are and . The vector is:
A)
B)
C)
D)
Answer: A) .
Explanation:
The vector from point to point is found by subtracting the position vector of from the position vector of :
.
Q3: The position vector of the point dividing the line segment joining (position vector ) and (position vector ) internally in the ratio 1:2 is:
A)
B)
C)
D)
Answer: A) .
Explanation:
Apply the internal section formula where the ratio is :
Substitute the given vectors and ratios:
Separate the components:
.
Q4: If and , which of the following is true?
A) and are equal vectors
B) and are parallel vectors
C) and are perpendicular vectors
D) and are unit vectors
Answer: B) and are parallel vectors.
Explanation:
Notice that we can factor out a scalar constant from vector :
Because can be expressed as a scalar multiple of ( with ), the two vectors point in the same direction and are therefore parallel.
They are not equal because they have different magnitudes (, ). They are not unit vectors (magnitudes ), and they are not perpendicular (their dot product is not zero).
Q5: The direction cosines of the vector are:
A)
B)
C)
D)
Answer: B) .
Explanation:
First, find the magnitude of the vector:
The direction cosines () are obtained by dividing each directional component by the vector's magnitude:
You can verify this is correct because the sum of the squares of direction cosines always equals 1: .
Q6: If , , and , then equals:
A)
B) 5
C)
D)
Answer: B) 5.
Explanation:
This problem can be quickly solved using the parallelogram identity:
Substitute the given magnitudes:
Taking the positive square root gives: .
(Note: Since , the vectors and are orthogonal. The diagonals of a rectangle are equal in length, so .)
Q7 (JEE type): If the position vectors of , , and are , , and respectively, and , then divides in the ratio:
A) 2:3 internally
B) 3:2 internally
C) 2:3 externally
D) 3:2 externally
Answer: B) 3:2 internally.
Explanation:
Start with the given linear combination and isolate :
Rewrite the denominator to match the internal section formula :
Comparing the terms, we see that and . Therefore, point divides the line segment internally in the ratio 3:2.